-
How to maintain and repair the laminating machine?
2020-12-11 1359
The requirements of each part of the machine are very high when the laminating machine processes the documents. For example, the surface accuracy of the cots. If the cots show some problems such as speckles, scratches and deformation, the processed documents will affect the processing effect, for example, it is not clear after processing. The processed documents need to be reworked from the beginning, which will be very difficult. It can be seen that the accuracy of the machine is closely relate
-
What are the special requirements of hot melt adhesive for glue loader?
2020-12-11 1295
Hot melt adhesive as a plastic adhesive, in the use of glue machine selection, then, the following by the small series to introduce how to select hot melt adhesive. The use of hot-melt adhesive with temperature changes, physical changes and chemical properties remain unchanged, used in binding art, the wide application of adhesive binding machine has become the main method of war end measurement, but the use of adhesive binding machine, the important thing is the selection of hot melt adhesive.
-
Problems that may occur when using glue mounting machine
2020-12-11 1242
One, the book block milling behind bad 1, book block is not neat, perhaps is not placed neatly, should ensure that each paper is placed exactly. 2. When milling the back of book block, the back milling amount is too small, so the book supporting board should be lowered to make the milling depth of 1.5-2.5mm (small milling cutter). 3. If the milling cutter cover plate is not in proper orientation, it is not parallel when opening, or it is not open enough or too large. It is necessary to re instal
-
How to operate the machine correctly?
2020-12-11 1370
The film machine has the advantages of high degree of automation, simple operation, high production speed, uniform coating thickness, high adhesion fastness, smooth coiling, no pollution, saving labor and raw material cost and other advantages. These advantages are shown on the basis of correct operation of the film coating machine. Therefore, the methods of how to use the film machine correctly are as follows: 1. The requirements of operators should be first Turn on the main power switch of the
-
What is the working principle of the film machine?
2020-12-11 1264
The film coating machine is mainly composed of four types of machines, which are the main machine, mirror roller system, discharging system and winding system. Our company's film machine, unit with polyethylene, polypropylene and other materials, using tape casting flat film extrusion coating process, after extrusion molding and a variety of substrate such as plastic woven cloth, paper, non-woven fabric, etc. for film coating or composite, improve the strength and density of materials, widely us
-
What important equipment is equipped on the laminating machine?
2020-12-11 1217
Laminating machine can be divided into two categories: coating machine and precoating laminating machine. It is a kind of special equipment for paper, board and film mounting. After being pressurized by rubber roller and heating roller, it is combined into paper and plastic products. So what are the important equipment on the laminating machine? 1. Coating oil head: the newly imported technology can be controlled by frequency converter. The glue is evenly coated after high precision grinding. 2.
-
How should Jiangmen laminating machine be maintained?
2020-12-11 1478
In printing and other professions, some easy to fold, vulnerable, easy to wet text documents will be attached to a layer of plastic film after printing. In this way, the documents are not only waterproof, antifouling, wear-resistant, folding resistant and chemical corrosion resistant, but also more beautiful. Laminating machine is the plastic film coated with adhesive and paper documents pressed together. It has a wide range of uses; but the laminating machine for its own internal parts accuracy